To connect a computer with another computer, or in a network computer / LAN (local Area Network) required media liaison, there is a media use a regular LAN cable (cat5, cat6), FO (Fiber Optic), or a wireless (wireless / wifi / radio).
Here will be discussed how to mengkrimping / make LAN cable to Rj-45 connector (standard connector for LAN cable), so we can make it ourselves.
Utuk more details I have made the video.
when we buy a network device, access point, modem router, etc., usually like to be given LAN cable which is about 1 to 2 meters long. What if we need a 5 meter, 6 meters or 20 meters? .. must use the services of people / experts to make it.
If we want to make it ourselves, no problem, because it was not difficult to make this LAN cable. Tools and materials are also easily available in stores that provide computer components and network accessories.
Tools and materials
1. Tang Crimping (used to be expensive hundreds of thousands, now there are under Rp 50ribu and the results are good)
2. LAN cable (UTP cable cat5 or cat6)
3. RJ-45 connector
Peel the outside of the cable protector by using crimping pliers (either with a cutter or scissors)
Arrange / sort the contents of the cable consisting of 8 small cable in it
(there are 2 types of LAN cable configurations, straight / straight, Cross-over / cross.Straight is used to connect computers to switch / hub devices and connections in general Cross-over is used to connect between two computers (without using hub / switch))
The color arrangement of the cord:
1. White-green
2. Green
3. White-orange
4. Blue
5. White-blue
6. Orenge
7. White-brown
8. Chocolate
If the color is properly arranged and neat, cut the cable by using a knife in the crimping pliers so that all cables are the same length and flat
Insert the cable in Rj-45 Connector, note the color sequence, do not let anything change
Press the cable into the connector until all the cables touch the end of the connector
Insert the connector into the crimping pliers, then press the crimping pliers aloud.
For the other end of the cable:
If you want to make a LAN Straight cable (straight configuration) do the same steps as above. If you want to create a Cross-over LAN cable (cross configuration) then the color of the cable arrangement on the other end is made different
Written by ANUNG
We are Creative Blogger Theme Wavers which provides user friendly, effective and easy to use themes. Each support has free and providing HD support screen casting.
0 komentar:
Posting Komentar